Introduction：

Model CLFZ Automatic weighing & dispensing system is a patented technology product. The system can achieve automatic control of ma­terial feeding, closed transfer, fine weighing and dust free dispensing

Working Principle

CLFZ automatic weighing and dispensing system consists of main framё support, feeding system, buffer bins, IBC bins, air sealing system, weighing system and control system. The feeding system is divided into several types, such as screw feeder, conical feeder, servoproportional feeder, rotary feeder and electromagnetic vibration feeder. When the system is working, various materials are respective­ly added to the buffer bins through multiple vacuum transfer ma­chines. The control system starts the air sealing and controls the feeders to proportionally add materials into the IBC bin. The weighed bin with materials are then transferred to next process.

Features

■ Various types of feeders available for selection

■ select single station or multi stations depending on different process requirements

■ Automatic weighing and dispensing, labor and cost saving
■ Easy to operate and clean
■ Closed transfer system, complying with FDA and GMP requirements

■ WIP washing system available

FEEDER SELECTION OF MULTI-STATION DISPENSING AND WEIGHING SYSTEM

Model J Screw Feeder

Application
Model J Screw Feeder is suitable for powder and particles with various character istics. It can weigh with high precision and dispense in a continuous and medi­um-speed.
Working Principle
Its electric drive screw is used to move materials. Variable pitch blades prevent materials extrusion. It is the most widely applicable and most accurate feeder.

Model K Servo Proportional Feeding Valve
Application
Model K Servo Proportional Feeding Valve is suitable for powder and particles with general flowing. It can weigh with high precision and dispense in a continuous and fast speed.
Working Principle
The opening and closing degree of the valve door can regulate the flow. When the valve is opened to the maximum, the material can be quickly dispensed. When precise dispensing required, the valve door can feed materials little by little according to the electronic scale data to realize high precision weighing.

Model D Electromagnetic Vibrating Feeder
Application
Model D Electromagnetic Vibrating Feeder is suitable for powder and partides with good flowing, no matter small dosage or high dosage. It can dispense with high precision and feed in a slow speed.
Working Principle
Its control system controls the vibration frequency of the electromagnetic pole and uses a specific tilting angle to slide the material along the vibra­tion chamber plate into the drum. The accuracy of dispensing is high.